High quality hologram thermal film. You can cut out any pattern, logo or pattern from the thermal film, you can do it with a plotter or manually with scissors, cutter. Thermo-film is applied with a heat press or iron (without steam); The protective film is removed after installation in one smooth movement from the already cooled material.
Before using the thermal film, test the sample to find the right temperature, time and pressure.
Due to the fact that installation equipment varies, we recommend selecting your individual installation mode for each material.
The manufacturer recommends:
- Thermal press soleplate heating temperature from 120°C to 150°C (in some cases up to 160°C);
- Press pressure 0,5kg;
- Dwell time of 8-15 seconds;
Fabric Future strongly advises choosing your own mode for working with the film, based on the manufacturer's recommendations;
Reflective thermal films belong to the group of materials that are not subject to certification in the Russian Federation.